SCHNEIDER MTN6500-0103 Spacelogic KNX/IP router

Detailní popis produktu

Jedná se o zboží na objednávku.
Doba naskladnění je od 7 do 30 dnů a v případě objednávky je potřeba provést platbu předem. Uhrazenou objednávku nelze stornovat.
DOBA DODÁNÍ JE POUZE ORIENTAČNÍ, DOPORUČUJEME SE PŘED OBJEDNÁNÍM PŘEDEM ZEPTAT NA PŘESNĚJŠÍ DATUM NASKLADNĚNÍ.
Zboží na objednávku nelze vrátit do 14 dnů.
Spacelogic KNX IP Router DIN Rail. The Spacelogic KNX IP Router allows the forwarding of telegrams between different lines through a LAN (IP) as a fast backbone. In addition, this KNX IP Router is suited to connect a PC to the KNX network e.g. for ETS programming. The KNX IP Router supports KNX Security which can be enabled in ETS. As a secure router, the device allows the coupling of not secured communication on KNX TP to a secured IP backbone. For the interface functionality (tunneling) KNX security prevents unauthorized access. The router supports up to 8 tunneling channels. For each tunneling channel, a separate individual address must be configured. The IP address can be obtained by a DHCP server or by manual configuration (ETS) respectively. This KNX IP Router works according to the KNXnet/IP specification using the core, the device management, the tunneling, and the routing part. The Spacelogic KNX IP Router has an extended filter table for main group 0 to 31 and is able to buffer up to 150 telegrams. The Router is powered by the KNX bus. An additional power supply is not needed. With 2 integrated push-buttons for testing purpose and 3 status LEDs. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal. The LAN network is connected via the RJ45 socket. Device width - 1 module = approx. 18 mm. Note - This application requires ETS 5 or higher. Contents - With bus connecting terminal and cable cover.
Kód produktu: 11.372.285
EAN: 3606489917845